In Pusuit Of … #2 – Part 2

Here is Part 2 of the second “In Pursuit Of”, and as it has been a while since I posted that one (well 3 months actually), if you need a recap this is where we last left off.

  • dreaming of wood, and it’s future melding with resin
  • waking up and realising that the form I built isn’t high enough for the wood that I wanted to use 
  • making mental note to measure properly next time
  • deciding to take a detour down another creation path, and make something else that will fit into the form
  • looking through my bits and pieces to find something to inspire me
  • finding “the thing” that will lead me to creation

  • finding another “thing” that can be combined with the first “thing” to hopefully make a complete thing that will be pretty nice
  • realising that the colours of the two things are going to work really well together (happy happenstance)
  • adding other bits that will (hopefully) complement the two “things”
  • starting to create
  • much fiddling around, and many resin layers later, “Burgundy Grape”exists
  • deciding I don’t like the square corners, so doing some therapuetic destrutive shaping with the sander to get this final shape
  • this piece is still undergoing it’s final finishing (and yes, it has been months), but everytime I think it is finished, IT”S NOT!
  • I shan’t bore you with the recitation of how much sanding, repouring of resin, more sanding, coating the wood part with latex to keep it clean, and pouring resin on the other part, then more sanding – and THEN realising that there were some only part-cured wet spots in the resin, so more sanding and recoating, and on and on and on
  • oh, I just did bore you – oops
  • anyway, suffice to say this morning I am recoating the Huon Pine with latex in the hopes of doing a FINAL coat of resin on the remaining part later today, in the hope of getting an acceptable finish.
  • cross your fingers for me

This piece has tested my patience, and my need for it to “look good”.  I don’t strive for perfection, because I think that is unrealistic, and because I also think it looks unnatural in these botanic pieces.  I want folks to know that this was handmade: by a real person, who struggled with it’s birth and upbringing, but kept persisting till they created something that was pleasing to them.

Hope you enjoyed this little excursion into how my process works (or doesn’t).  I will post some finished pictures at some stage (if it ever actually gets finished).

8 thoughts on “In Pusuit Of … #2 – Part 2

    • Claudette 11/10/2020 / 4:29 pm

      I’m hoping so. There’s been a LOT of perserverance, so the finish better be a good one!

      Like

  1. Brian Lageose 12/10/2020 / 8:06 am

    I really like how this is turning out. (Almost as much as I like your description of the process. You know I’m a big fan of these posts.)

    Liked by 1 person

    • Claudette 12/10/2020 / 7:11 pm

      🙂 I am hoping this one will be finished soon – it’s a long labour.
      Thanks for being a fan, felt this episoe was a little to “bland” but as i was written in restrospect with some time distance, I just wasn’t feeling the things as closely.
      I have aother biggish project in the making – involving table legs – so that may get a run soon.

      Liked by 1 person

  2. Christi 12/10/2020 / 9:40 am

    Pleasing rather than perfect… that sounds like good advice. I need to remember that!

    Liked by 1 person

    • Claudette 12/10/2020 / 7:13 pm

      We all get hung up on perfection at some stage I think – but for me these days I try to moderate that impulse, because resin really isn’t for perfectionsists, unless you have oodles and oodles of time, and heavy duty machinery and tools!

      Liked by 1 person

    • Claudette 16/10/2020 / 6:01 pm

      Thank you so very much for your kind words. When it turns out good inthe end I am happy, when it keeps turning out a “problem” I am less so 🙂

      Liked by 1 person

Happiness is kind words from a friend .....

Please log in using one of these methods to post your comment:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s